
Each injection mold, forging dies and stamping tooling piece begins its life as a solid piece or bar of steel. But once the wrong steel is selected, it will be difficult to make the tooling piece successful despite all the efforts put into machining it properly. The steel could easily crack at an early stage, wear out faster or warp during heat treatment, thus resulting in losses.
It is important for the tooling makers, mold makers and component producers based in Noida to know how to select the right tool and die steels and a reliable tool and die steel suppliers. This guide contains clear information about different steel families and their applications as well as a checklist for selecting a steel type and a supplier.
What Is Tool and Die Steel?
Tool and die steel refers to the high quality alloys steels which have been designed for cutting, forming and molding of other materials. Tool and die steel are very different from the ordinary construction steel since they have been specially designed to retain their hardness, toughness and withstand stresses and temperature changes.
The variation in properties of these steels arise due to alloying elements such as chromium, molybdenum, vanadium, tungsten, and nickel. The process of melting, forging and heat treatment also affects their properties. A particular steel which is very wear resistant may lack toughness whereas a steel which can withstand high temperatures is not always a good steel for producing sharp edges.
The following grades of steel are available with them on an ex-stock basis:
- 1. DIE STEEL ( HH 370 – 410 BHN ) (DB6 / DIN-1.2714 / AISI L6 )
- 2. HOT WORK STEELS (DIN 2343, 2344 / AISI H11, H13)
- 3. PLASTIC MOULD STEELS (DIN 2738, 2311 , AISI P 20 )
- 4. HIGH SPEED STEELS (DIN 3243 , 3343 / AISI M2 , M35)
- 5. COLD WORK STEELS – HCHCr. (DIN 2379 , 2080 / AISI D2 , D3)
- 6. ALLOY STEELS, EN-SERIES ETC.
Quality infrastructure: an in-house lab equipped for chemical and spectrometric analysis, ultrasonic testing, and hardness testing across Brinell, Rockwell, and Vickers scales — helping Noida-based buyers select the right grade using test data rather than guesswork, and optimize cost-per-component over the long run.
Value-added services: cut-to-size pieces, machining, tailor-made material, and metallurgical advice, backed by Material Test Certificates on request.
Logistics: Virat’s Gurugram plant sits on the opposite side of the NCR from Noida, roughly 50 km away via the road network connecting Delhi’s satellite cities. Delivery timelines to Noida are typically consistent with standard intra-NCR dispatch — contact the team directly with your order details for a specific estimate.
Here, they also have an impressive fully equipped quality assurance and process examination facility. This includes a laboratory for analyzing steel by conducting both chemical tests and spectrometry; ultrasonic examination and hardness testing on Vickers, Rockwell and Brinell scales. This adds value for their clientele by allowing for them to select the most appropriate type of steel readily available for their specific application; and also allows them to examine options and in the long haul optimize costs.
Main Types of Tool and Die Steel
Hot Work Tool Steel (H13, H11)
Hot working steels are used where the cutting tool is in contact with hot metal or subject to constant heating and cooling cycles. Chromium molybdenum vanadium types like H13 and H11 (also known as DIN 1.2344 and 1.2343 respectively) are used widely since they have toughness and are resistant to heat softening and thermal fatigue.
Examples: pressure die casting dies, aluminum extrusion dies, forging dies and inserts.
Tools used to form or cut materials at room temperature are cold work steels. The high carbon, high chromium grades like D2 and D3 (the standard DIN grades are 1.2379 and 1.2080) have excellent wear resistance and edge holding.
Common applications: blanking and piercing dies, trimming tools, slitting knives, shearing blades, and forming rolls.
Plastic Mould Steel (P20 and DIN 1.2738)
Plastic mould steels are available predominantly in the pre-hardened state, which means that the molds do not require a hardening process after the machining phase. P20 and the grade containing nickel known as DIN 1.2738 are the most widely used steels for injection molding. These types of steel have excellent machinability, good polishing characteristics, and adequate strength.
Common applications: injection mold cavities, injection mold cores, mold bases, and housing parts for electronics and appliances.
The high-speed steels retain their hardness even at the high temperature produced during cutting. M2 is the standard grade, whereas M35 incorporates cobalt to give better hot hardness.
Application: drills, taps, milling cutters, broaches, etc.
DB6 Die Steel (DIN 1.2714 / AISI L6)
The steel DB6 is made of chromium-nickel-molybdenum steel, which is commonly used for forging die blocks. This steel is tough and supplied by Virat in a hardness range from 370 to 410 BHN.
Main applications: forging dies and die blocks, and impact tools.
Key Properties to Look For
In the comparison of tool steels, buyers need to consider both the name of the grade and its features that determine tool life:
- Hardness: ability to resist indentation and deformation, which determines wear life
- Toughness: capability to withstand impacts without breaking or chipping
- Wear resistance: more important for blanking dies and cutting tools
- Hot hardness and thermal fatigue resistance: more critical for die casting and forging
- Dimensional stability: amount of shrinkage and movement when heat treated
- Polishability: important for mould cavities that have cosmetic surfaces
- Steel purity and homogeneity: less inclusions and homogeneous structure mean fewer failures
This is an important issue which most purchasers do not realize. Even two ingots with the same grading will act in different ways according to how they have been melted and forged. That is why it is important to test and record such factors.
Machinability and Heat Treatment
How a steel is delivered shapes how you work with it.
P20 pre-hardened steel can be machined as delivered. It saves time and avoids warping due to hardening, which makes pre-hardened steel the preferred delivery mode for mold-making.
Annealed steels including H13, D2 and M2 delivered annealed are softer and easier to machine. After rough machining, hardening and tempering process is done to get to required hardness. This process provides more hardness, but requires dimensional adjustment during manufacturing and heat treating partner following manufacturer recommendations.
General advice: observe cutting parameters, stress relief after rough machining as recommended and proper tempering to avoid brittleness. Tool steel suppliers providing metallurgical advice can assist in selecting the best delivery mode for your part.
Applications and Typical Industries
The Noida region and the entire NCR region have a variety of manufacturers of products such as electronics and auto ancillaries, precision engineering, appliances, and plastic components. These products create consistent demand for a variety of tool steels including:
- Electronics & Appliances – injection mould for housing, panels, connectors require polishable plastic mould steels like P20, and cold work steels for sheet metal tooling.
- Automobiles & Auto Ancillaries – forging dies, die casting dies and stamping tools use DB6, H13, and D2.
- Plastic and Packaging – moulds for caps, containers and crates require pre-hardened mould steels.
- Aluminium Extrusion & Die Casting – extrusion dies and die casting inserts use H13 and H11.
- Precision Machining – cutters, drills, and taps use high speed steels such as M2 and M35.
- Forgings, Hand Tools, Railways, Mining and Oil and Gas – wide range of hot work, alloy, and tool steels is required.
Why Virat Special Steels for Tool and Die Steel Near Noida
Virat Special Steels Pvt. Ltd. has been serving the steel industry since 1957, formerly operating as Dhingra Mill Store. The company is an importer, exporter, stockist and supplier of tool steel, die steel, die blocks, special steel and alloy steel for industrial applications. Buyers in Noida can benefit from the company’s stock availability at its Gurugram and Ludhiana facilities, offering grades such as H13, H11, DB6, D2, D3, P20, M2, M35 and EN series alloy steels. Virat Special Steels supplies flat bars, square bars and round bars in various sizes, along with value-added services including cutting to size, machining and material selection guidance. Its quality control facilities include chemical and spectrometric analysis, ultrasonic testing, and Brinell, Rockwell and Vickers hardness testing. Material Test Certificates (MTCs) are available on request. The company also works with international steel manufacturers, including SeAH Besteel, Nippon Koshuha and NLMK Verona. For manufacturers, toolmakers and procurement teams in Noida, these services can help simplify material sourcing, support quality requirements and improve procurement efficiency.
Frequently Asked Questions
Who is a reliable Tool and Die Steel Supplier in Noida?
Virat Special Steels Pvt. Ltd. supplies tool steel, die steel, alloy steel, and specialty steels to electronics, engineering, and component manufacturers across Noida and Gautam Buddh Nagar district.
Which tool and die steel grades are available for Noida-based buyers?
H13, H11, DB6, D2, D3, P20, M2, and M35 are available on an ex-stock basis, along with EN-series alloy steels.
Is P20 mould steel suitable for electronics housing molds?
Yes — P20’s machinability and polishability make it a common choice for injection molds producing electronics housings, appliance panels, and connector components.
Which grade suits precision cutting tools for electronics manufacturing?
M2 and M35 high speed steels are typically used for cutting tools requiring hardness, wear resistance, and hot hardness in precision machining applications.
Is cold work steel available for sheet metal component dies?
Yes — D2 and D3 are supplied for punches, blanking dies, and other tooling used in precision sheet-metal fabrication.
Can I get cut-to-size tool steel instead of a full bar?
Yes — cut-to-size and machining services are available so you don’t pay to process material you won’t use.
Does the supplier provide Material Test Certificates?
Yes, MTC and relevant quality documentation are available on request.
How do I get a quote for tool and die steel in Noida?
Share your required grade, dimensions, and quantity with the technical sales team to receive an application-specific quotation.
Which tool and die steel grades are most commonly used?
Common choices are H13 and H11 for hot work, D2 and D3 for cold work, P20 for plastic moulds, DB6 for forging die blocks and M2 or M35 for cutting tools.
What is the difference between hot work and cold work tool steel?
Hot work steels (H13, H11) keep their strength and resist thermal fatigue at high working temperatures. Cold work steels (D2, D3) are optimised for wear resistance and edge retention at or near room temperature.
Do I need a Material Test Certificate?
For traceability and customer audits, especially in automotive and electronics supply chains, an MTC is strongly recommended. Ask for it when you order.
Can I buy cut-to-size tool steel instead of a full bar?
Yes. Cut-to-size and machining services are offered by Virat Special Steels, so you only pay for the material you need.
How do I get a quotation?
Send your grade, dimensions, shape and quantity to the technical sales team by phone, email or the contact form. Quote requests with the application details help the team recommend the right steel.
Consult our Gurugram office for further assistance.
Meanwhile for more on Virat Special Steels;
Email Us: info@viratsteels.com.
Contact them by mobile numbers 98140 – 21775, 99991 – 24971 to 79.
Mode of Supply
Virat Special Steels is the largest stockiest and supplier of Tool Steel, Die Steeels and Mould Steels in flat, square and round bar. We provide steel in all sizes as your requirements. All grades of steel is available in flat, square and round shape. Consult our team who will assist you for any Special Steels query.

VIRAT SPECIAL STEELS PVT. LIMITED – Virat Steel Brochure
DOWNLOAD BROCHURE >>
Addition to other Grades:
HCHCR-D2 Steel , HCHCR-D3 Steel , P20+Ni Steel , P20 Steel , DB6 Steel , H13 Steel, H11 Steel, H21 Steel, H10 Steel, H12 Steel, M2 Steel, M35 Steel, M42 Steel, T1 Steel, DIN 2379 Steel, DIN 2080 Steel, DIN 2738 Steel, DIN 2311 Steel, DIN 2714 Steel, DIN 2344 Steel , DIN 2343 Steel, DIN 2581 Steel, DIN 2365 Steel, DIN 2606 Steel, DIN 3343 Steel, DIN 3243 Steel, DIN 3247 Steel, DIN 3355 Steel AISI D2 Steel, AISI D3 Steel, AISI P20+Ni Steel, AISI P20 Steel, AISI L6 Steel , AISI H13 Steel, AISI H11 Steel, AISI H21 Steel, AISI H10 Steel, AISI H12 Steel, AISI M2 Steel, AISI M35 Steel, AISI M42 Steel , AISI T1 Steel
